Learning Outcomes

Principal Dimensions

Hydrostatic Pressure

Coefficient of Forms for Calculations

Lesson Summary

This module will teach you about the principle dimensions of a vessel, density, and relative density, calculation of wetted surface area, as well as principles of hydrostatics. This module will also teach you about the calculation of waterplane, block, prismatic and midship coefficients, as well as the load on an immersed plane.

Application of Simpson's Rules To Areas

Simpson's First Rule

Simpson's Second and Third Rules

This module will teach you about hull geometric calculations, the moment of area, the moment of inertia, as well as how to calculate waterplane area. This module will also teach you about the longitudinal and vertical centres of buoyancy, as well as the applications and ordinates of Simpson's first, second, and third rules.

Buoyancy

Displacement

Fresh Water Allowance and Coefficients

This module will teach you about the concepts of buoyancy and reserve buoyancy, the law of floatation, as well as the two constituents of displacement which include; light and load-displacement. This module will also teach you about the effect of tons per inch on the ship's draft, calculation of freshwater allowance, the difference in densities of water, the dock water allowance, and change of draft.

Hydrostatic Curves and Draft

Transverse Statistical Stability

Moment of Statical Stability

This module will teach you about the functions of hydrostatic curves and tables, the centre of floatation. The module will also teach you about the angle of loll, as well as moments of statical stability at small and large angles of the heel.

Diploma in Ship Stability - First Assessment

Curves and Cross Curves of Statical Stability

Movement of Center of Gravity

Metacentric Heights

List and Vessels

Free Surface Effects

This module will teach you about the curve of intact statical stability and the range of stability at different angles of the heel. This module will also teach you about the concept of metacenter, derivation of the formula for the list. The differences between the stiff and tender vessels, as well as the concepts of the free surface effect, will also be highlighted.

Moment of Change Trim

Bilging and Permeability

Intact Stability Requirements

Dewatering and Cross Flooding Arrangement

This module will teach you about concepts of pitch, and trim as well as the concepts of bilging and permeability. This module will also teach you about the relationship between the GZ curve and the intact stability requirements, as well as the concepts of dewatering, cross flooding arrangements. The functions of hydraulically operated watertight doors will also be highlighted.

Diploma in Ship Stability - Second Assessment

Diploma in Ship Stability - Course Assessment

Learn about ship stability, principles of hydrostatic pressure and the free surface effect in this free online course.

Diploma in Ship Stability

Study the principal dimensions of a vessel used for performing the basic calculations as you are introduced to ship stability. You will also learn about the functions of hydrostatic tables and hydrostatic drafts. You will be able to explain the importance of the damage control plan as well as the functions and operations of hydraulically operated watertight doors. Start this course today to improve your understanding of ship stability.

When building a ship, what calculations need to be made and how should the structure be crafted? Throughout this course, you will answer these questions along with other matters of a vessel's stability. You will be introduced to the history of adaptive and variant designs in ships as well as the contributions of computational fluid dynamics and ship model testing. You will cover basic vessel calculations, the Wetted Surface Area (WSA), hydrostatic pressure and the four coefficients of importance needed to understand the basics of ship stability along with their formulas. What other rules can be used to calculate the area and volume of a vessel? Simpson's rules are also covered as you examine the history behind these concepts.
As you continue your studies, you will be introduced to the concepts and definition of ‘buoyancy’, together with the principle of floatation. You will learn about the concepts and characteristics of displacement tonnage, along with the two constituents of displacement: light and load displacement. The concepts and functions of deadweight will also be covered in this course. Fresh watermarks for the ship, hydrostatic curves, the functions of hydrostatic tables as well as the concept and functions of the hydrostatic draft are all discussed. The principles of transverse statical stability will also be taught in this course.
Furthermore, this course will help you get familiar with the illustration, construction and interpretation of the curve of statical stability. You will also be familiar with the concepts and differences between stiff and tender vessels. This course will teach you about the shift in the centre of gravity, free surface correction, Moment to Change Trim (MCTI), SOLAS general requirements and much more. The concepts of bilging, permeability and damage control planning will be discussed as well. You will also be familiar with the functions and operations of hydraulically operated watertight doors as well as the cross-flooding arrangement. For those interested in the architecture of a ship and how to keep it stable upon the open water, this course will be a great resource. Register for this course and start your next learning journey today.

5 Best Free Raspberry Pi Courses for Beginners in 2025

7 Best Free Haskell Courses for 2025

600+ Courses from Top Med Schools with Free Certificate & CME Credit

OpenAI Academy Review: A Close Look at ChatGPT 101 for Small Businesses

[2025] Massive List of Thousands of Free Certificates and Badges

Harvard CS50 Guide: How to Pick the Right Course (with Free Certificate)

Scaler Academy’s Big Lie: How India’s EdTech Darling Inflated Revenue by 15x

10 Best Guitar Courses for Beginners in 2025

Udemy Earns More, Pays Instructors Less: Class Central Exclusive

2U/edX Implements Another Round of Layoffs Amid Ongoing Financial Struggles

7 Best Climate Change Courses for 2025: Exploring the Science

Learn Something New: 100 Most Popular Courses For December

10 Best Programming Courses for 2025

University of Sheffield Ends 11-Year Partnership with FutureLearn

9 Best GIS Courses for 2025: Navigating Spatial Data

8 Best Crochet Courses for 2025: Practical, Enriching, Creative

Aims & Objectives of ISO/IEC 17025:2017

Accrediting to ISO/IEC 17025:2017

Main Sections of ISO/IEC 17025:2017

This module presents the fundamental aspects of ISO/IEC 17025:2017 along with its aims and objectives. The module also explains different forms of standardized verbs used throughout the standard. Moreover, you will also learn the benefits of accrediting to ISO/IEC 17025. Lastly, an overview of the section's standard is also given.

General and Structural Guidelines for Laboratories

Resource Requirements for Testing Laboratories

Contracts, Validation, Sampling & Handling

Technical Records, Uncertainty, Results Validity, & Reports

In this module, you will encounter the essential requirements given in clauses 4, 5, 6, and 7 of ISO/IEC 17025;2017. However, the explanation of Clause 7 is provided till sub-clause - 7.8. Through this module, you will learn about the general, structural, resource, and process requirements of ISO/IEC 17025:2017.

Information Management, Complaints & Nonconformities (NCs)

Management System Requirements

Taking Corrective Actions

In this module, you will see discussions on ISO/IEC 17025:2017 beginning from sub clause 7.9 that puts forward the complaint requirements put forth by the standard. Furthermore, it presents the standard's requirements regarding management systems. Moreover, it also contains necessary measures to be taken for corrective actions.

ISO/IEC 17025:2017 - Laboratory Management System- Course Assessment

Learn about laboratory management systems laid out by the ISO 17025 international standard in this free online course.

ISO/IEC 17025:2017 - Laboratory Management Systems

This short course is designed for individuals and laboratories looking forward to their standardisation. We explain management standards defined by the ‘ISO/IEC 17025 general requirements for testing and calibration laboratories competence’ devised by ISO. This comprehensive course explains all the basic and essential requirements of the standard. It also provides a simplified clause-by-clause explanation of its four main sections.

Fundamentals of Pest Control

Pest Identification and Assessment

Non-Chemical Pest Control Methods

Chemical Pest Control Methods

This module will teach you the fundamentals of pest control, types of pests and their impact, pest life cycles and behavior, factors influencing pest infestations, pest identification and assessment, non-chemical pest control methods, genetic control and sterile insect, chemical pest control methods, and integrated pest management (IPM) approach.

Monitoring and Prevention

Sustainable Pest Management

Urban and Structural Pest Control

Topics you will learn in this module include but are not limited to pest monitoring techniques, preventive measures and exclusion strategies, ecological impact of pesticides, selective pesticide use and resistance management, organic and biodynamic pest management, pest management in residential areas, and commercial and industrial pest control.

Pest Control and Management - Assessment

This free online course teaches you how to use chemical and non-chemical pest control techniques to manage infestations.

Pest Control and Management

Pests make environments unhygienic and are a major cause of diseases, some of which may be lethal and difficult or expensive to cure. Effective pest management and control are necessary to keep a living and working environment free from health hazards. This course provides the knowledge and skills required to establish and maintain a successful pest control management programme and describes various pests, their life cycles and their behaviour.

Foundations of Construction Safety Management

Safety Management for Hazardous Environments

High-risk Site Activities and Demolition Safety

This module covers risk identification and mitigation in construction work and how to evaluate and manage risk in compliance with CDM regulations. You'll also learn how behaviour affects safety on construction sites, including safety measures for scaffolding, excavation, demolition and more.

Course Assessment - Site Management Safety Training Scheme (SMSTS)

Learn how to manage safety on construction sites in accordance with UK legal provisions in this free online course.

Site Management Safety Training Scheme (SMSTS)

Construction workers are often vulnerable to injuries and hazards so ensuring safety is maintained consistently is crucial for both site managers and workers. This course covers the essential knowledge needed for maintaining safety on construction sites. You'll learn to identify and assess risks while adhering to UK industry regulations. In addition, we'll discuss safety measures to take during erecting scaffolding, excavations and demolitions.

Introduction to Hot Work

Classification of Hot Work Areas

Roles and Responsibilities

Hot Work Permit

Hot Work Risk Assessment

Essential Safety Precautions

This module will familiarize you with hot work processes, including their potential hazards and safety precautions. You'll learn how to assess the risks associated with hot work and determine appropriate control measures. You'll also understand the hot work permit system and the roles & responsibilities of those involved in the permitting process.

Hot Work Safety - Course Assessment

Learn how to manage the hazards associated with hot work processes in this free online health and safety course.

Hot Work Safety

This hot work safety training equips you with the essential knowledge to recognize and mitigate hot work hazards. You'll understand the hot work risk assessment process and hierarchy of controls for effectively reducing risks. The course explains the hot work permit system along with the roles and responsibilities of those involved in the permitting process. You'll also gain a clear understanding of hot work permitted and prohibited areas.

Introduction to Traffic Marshalling

Traffic Management

Temporary Traffic Control

Traffic Risk Assessment

Vehicle Signaling

Reversing Vehicles

Health and Safety

In this module, we will look at the fundamental objectives of traffic marshalling and the general duties of a traffic marshal. A traffic marshal's responsibilities when controlling traffic on a highway or construction areas shall be examined. Assessing risks along with health and safety concerns of traffic near construction areas will be assessed.

Construction Safety: Traffic Marshalling - Course assessment

Train as a traffic marshal or bankman who provides traffic management on construction sites in this free online course.

Construction Safety: Traffic Marshalling

This course takes an in-depth look at the role of traffic marshals on construction sites. Traffic management is important to maintaining health and safety as the presence of heavy machinery and large vehicles creates a need for the efficient direction of traffic. Traffic management in such a busy area faces hazards and safety risks, which we identify in this course. Sign up to train as a traffic marshal or bankman and add a skill to your CV.

Introduction to the AS Standards

Organization's Context and Leadership

QMS Planning and Support

This module introduces students to the AS standards for suppliers of the aviation industry. It explains the importance of regulations in the aerospace industry and navigates them through the journey of different AS standards. It also explains the requirements of Clauses 4, 5, 6, and 7 of this standard.

Organizational Operations

Operations and Evaluation

Organizational Improvement

This module explains the requirements of Clauses 8, 9, and 10 of AS9100D. These requirements are regarding organizational operations, evaluation, and continuous improvement of the organizational operations.

AS9100D Quality Management System (QMS) for Aerospace Industry - Course Assessment

Learn the requirements of AS9100D for the developers and suppliers of components for the aerospace & defense industries.

AS9100D Quality Management System (QMS) for Aerospace Industry

This course explains different clauses and their various requirements for the organizations that develop, design, or supply parts, components, and assemblies concerned with the aerospace and defense industries. After enrolling, the students will be able to navigate the differences between the different versions of the AS standards. Moreover, they will also get a simple and straightforward explanation of this standard's requirements.

Introduction to Hazardous Materials Handling - Learning Outcomes

Understanding Hazardous Materials

Legal and Regulatory Compliance

Importance of Hazard Communication

Risk Assessment and Management

Personal Protective Equipment (PPE) for Hazardous Materials Handling

Introduction to Hazardous Materials Handling - Lesson Summary

In this module, participants will have a solid foundation in understanding hazardous materials, legal and regulatory compliance, hazard communication, risk assessment, and the proper use of personal protective equipment. This knowledge is essential for creating a safe and compliant working environment in industries dealing with hazardous materials.

Hazardous Materials Storage and Transportation - Learning Outcomes

Proper Storage Practices for Hazardous Materials

Managing Segregation and Compatibility of Hazardous Materials

Emergency Preparedness for Hazardous Materials Storage

Transportation Regulations

Handling Hazardous Materials in Transit

Emergency Response Planning

Case Studies and Lessons Learned

Hazardous Materials Storage and Transportation - Lessons Summary

This module covers storing hazardous materials, segregation and compatibility, and developing emergency response plans. Learn DOT regulations, proper labelling, packaging, and security measures for transportation, best practices for loading/unloading and case studies.

Advanced Hazardous Materials Handling Techniques - Learning Outcomes

Decontamination Procedures

Confined Space Entry Protocols

Managing Hazardous Waste

Best Practices for Chemical Spill Response

Continuous Improvement in Hazardous Materials Handling

Advanced Hazardous Materials Handling Techniques - Lesson Summary

This module covers decontamination techniques to ensure health, safety, and regulatory compliance. Learn to manage decontamination zones, handle confined space hazards, and apply physical, chemical, thermal, and radiological decontamination. Develop skills in PPE selection, emergency response planning, and environmental protection.

Hazardous Materials Handling Mastery - Course Assessment

Gain expertise, ensure safety, and excel in hazardous materials handling with this comprehensive free online course.

Hazardous Materials Safety Specialist

This course covers the classification, legal compliance, and risk assessment of hazardous materials. It delves into communication standards, PPE usage, and storage guidelines. Transportation regulations and emergency response planning are also covered. Advanced techniques include decontamination, confined space entry, hazardous waste management, chemical spill response, and continuous improvement through safety audits and case studies.